http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/ios112p/gsr/wred_gs.htm
is a better doc for mdrr. Basically, look for docs on
'cos-queue-group'
eric
On Fri, Apr 06, 2001 at 11:38:47PM -0400, Eric Osborne wrote:
> On Fri, Apr 06, 2001 at 04:39:21PM -0400, Rajesh Talpade wrote:
> > Hi
> >
> > I emailed a query regarding DRR on Cisco 12008 a few days back, but did
> > not receive a response yet. Does this mean that the 12008 does not
> > support DRR, or any other WFQ-equivalent, currently ?
>
> no; the entire 12000 line supports mdrr.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120st/120st10/10st_cos.htm
>
> is the first thing I could find. Yes, it's an MPLS doc, but the MDRR
> config is the same for both mpls and IP.
>
>
>
> eric
>
> >
> > Anyone from Cisco care to respond ?
> >
> > Thanks.
> > Rajesh.
> >
> >
> > > Would someone point me to documentation describing configuration of
> > > distributed round-robin or equivalent on a 12008. It currently has IOS
> > > version 12.0(12)S, but this can change if needed.
> > >
> > > I have looked thru the Cisco web-site, and was not successful in finding
> > > relevant information.
> > > They talk about WRED in the same breath as DRR, but do not explicit
> > > indicate how DRR can be configured/used.
> > >
> >
> > --
> > Rajesh R. Talpade rrt@research.telcordia.com 973 829-4261
> > Director, Network Security Group, Telcordia Technologies
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT