Jonathan,
Look at atm oam-pvc (since 11.3)and frame-relay end-to-end keepalive
(since 12.0.5T)
Zoltan
-----Eredeti üzenet-----
Feladó: Desmarais, Jonathan [mailto:JDesmarais@colt-telecom.com]
Küldve: Thursday, April 19, 2001 2:50 PM
Címzett: cisco-nsp@puck.nether.net
Tárgy: [nsp] [nsp]ATM VC's link states changes
As Frame relay and ATM virtual circuits do not exchange keppalives with
remote routes, when VC's fail the interface still remains active. This
is
causing a problem for me when using HSRP. I need to track the WAN
interface
state to ensure the HSRP session fails over.
Any idea's?
Regards
Jon
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:35 EDT