Re: [nsp] 4700 ISDN BRI module config Q

• Next message: sthaug@nethelp.no: "RE: [nsp] a question CRC error and resent"
• Previous message: kevin.cowell@bt.com: "[nsp] Classical IP over ATM Authentication"
• Maybe in reply to: john heasley: "[nsp] 4700 ISDN BRI module config Q"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

John:
   I had the same problem.
   I'm just starting to learn this stuff ... but it seemed like when I
modified my DIALER MAP IP line -- to include 'BROADCAST 2148008410'/
(thats the destination DN) mine became valid.
Take with a grain of salt.

EXAMPLE
interface BRI0
 ip address 10.254.254.249 255.255.255.252
 no ip directed-broadcast
 encapsulation ppp
 dialer idle-timeout 90
 dialer map ip 10.254.254.250 name dpcrtr2 broadcast 2148008000
 dialer load-threshold 1 outbound
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 97249013000101 9724901300
 isdn spid2 97249013010101 9724901301

Christopher D. "Rook" Mears
cmears@digitalpilot.com

• Next message: sthaug@nethelp.no: "RE: [nsp] a question CRC error and resent"
• Previous message: kevin.cowell@bt.com: "[nsp] Classical IP over ATM Authentication"
• Maybe in reply to: john heasley: "[nsp] 4700 ISDN BRI module config Q"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:35 EDT