This will only be the case until the next OSPF process restart, at which
point it will revert to the loopback interfaces.
Regards
-----Original Message-----
From: Scott.Keoseyan@BroadWing.com [mailto:Scott.Keoseyan@BroadWing.com]
Sent: 01 May 2001 14:39
To: JDesmarais@colt-telecom.com; cisco-nsp@puck.nether.net
Subject: RE: [nsp] ospf and boucing circuit.
Not if you create the loopback after the OSPF process is already active.
Cheers,
Scott
-----Original Message-----
From: Desmarais, Jonathan [mailto:JDesmarais@colt-telecom.com]
Sent: Tuesday, May 01, 2001 9:20 AM
To: cisco-nsp@puck.nether.net
Subject: RE: [nsp] ospf and boucing circuit.
Does IOS not automatically select the loopback IP address if it
is present?
It has always in my experience.
Regards
Jon
-----Original Message-----
From: George Robbins [mailto:grr@shandakor.tharsis.com]
Sent: 01 May 2001 11:19
To: cisco-nsp@puck.nether.net; tatsuya@kivex.com
Subject: Re: [nsp] ospf and boucing circuit.
Make sure that the OSPF router ID is not an IP associated with one
of the circuits that might bounce. It's always a good idea to create
a loopback that'll be selected as the router id or with 12.x explicitly
specify an "ip ospf route-id a.b.c.d".
George
> From cisco-nsp-request@puck.nether.net Tue May 1 00:53:16 2001
> Resent-Date: Tue, 1 May 2001 00:53:10 -0400
> Received-Date: Tue, 1 May 2001 00:51:09 -0400
> Date: Tue, 1 May 2001 00:40:23 -0400 (EDT)
> From: Tatsuya Kawasaki <tatsuya@kivex.com>
> X-Sender: tatsuya@kds1
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] ospf and boucing circuit.
> Resent-From: cisco-nsp@puck.nether.net
> X-Mailing-List: <cisco-nsp@puck.nether.net> archive/latest/6226
> X-Loop: cisco-nsp@puck.nether.net
> Precedence: list
> Resent-Sender: cisco-nsp-request@puck.nether.net
>
> Hi you all,
>
> Does any of you have problems with OSPF protocol and
bouncing circuit?
> It appeared that when DS3 bounces, sometimes we lose OSPF update..
> I had not had a chance to take a close look that what part of OSPF is
> failing. Version of cisco we are currently running is 12.0x
> So in order to solve that problem, we need to restart OSFP process.
> Does anyone have simlar problem?
> Interesting thing is that it start having problem almost 1 hour after
> circuit bounces.
>
> Tatsuya
>
>
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> Tatsuya Kawasaki
> Allegiance Telecom
> Unlock the Power of the Internet
> http://www.kivex.com
> Phone 301.215.6777 Fax 301.215.5991
> Affiliation given for identification not representation
> /_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>
>
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:37 EDT