Felix,
What problem do you have that you need to run debugging on DLSw? Some debug
commands put a considerable load on the router, and in some cases produce
considerable output which consume most of the system's resources.
Also, 11.2(17)P is quite old - have you tried more recent software to see
if the problem recurs there? (The most recent in this train is 11.2(26)P....)
philip
--At 03:26 14/05/2001 +0000, Felix Lee wrote: >Dear all, > >Please give some advice on this issue. I have a Cisco router 7513 with >the following configuration. The router hanged up after switching on >"debug dlsw .." > >Please help.. > >Felix > > > >CPU utilization for five seconds: 30%/18%; one minute: 28%; five minutes: 28% > >slot0:rsp-jsv-mz_112-17_P.exe >cisco RSP4 (R5000) processor with 131072K/2072K bytes of memory. >G.703/E1 software, Version 1.0. >SuperLAT software copyright 1990 by Meridian Technology Corp). >Bridging software. >X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. >TN3270 Emulation software. >Chassis Interface. >1 FSIP controller (8 Serial). >2 TRIP controllers (8 Token Ring). >1 VIP2 controller (8 Serial). >1 FEIP controller (2 FastEthernet). >2 FastEthernet/IEEE 802.3 interface(s) >8 Token Ring/IEEE 802.5 interface(s) >16 Serial network interface(s) >123K bytes of non-volatile configuration memory. > > >---------- >Get Your Private, Free E-mail from MSN Hotmail at ><http://www.hotmail.com>http://www.hotmail.com.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:37 EDT