Re: [nsp] IPSEC over ISDN BRI backup interface

From: Edoardo Martelli (e.martelli@nextra.it)
Date: Tue May 15 2001 - 07:12:09 EDT

Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: PIX 520."
Previous message: Travis Pugh: "Re: [nsp] 12.0(16)S1"
In reply to: Rolands Truls: "[nsp] IPSEC over ISDN BRI backup interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

> Is it possible to use ISDN BRI as a backup interface for IPSEC tunnels which
> are primary running over serial interaces ?

yes. Configure the serial/isdn router to identify the tunnel with the
address of a loopback interface:

crypto map MYCMAP local-address Loopback0
crypto map MYCMAP 10 ipsec-isakmp
set peer 2.2.2.2
[...]

ciao
Edoardo

-- 
e.martelli@nextra.it  
phone: +39 051 6139242 
fax:   +39 051 6114455

Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: PIX 520."
Previous message: Travis Pugh: "Re: [nsp] 12.0(16)S1"
In reply to: Rolands Truls: "[nsp] IPSEC over ISDN BRI backup interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:37 EDT