Thank for your help,
Please recommended which is the IOS need to be installed ?
Here is our IOS and Mica modem IOS that we used it :-
Need we upgraded our IOS to version 12.1(0.4) 12.1(0.5)T 12.1(1)DC
12.1(1)DB ? Please advise.
BKJ24-Jaring#sh flash
System flash directory:
File Length Name/status
1 7022068 c5300-is-mz.120-6.5.T4
2 468984 mica-modem-pw.2.7.2.0.bin
ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc
1)
BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE
SOFTWARE (fc1)
--nazri/access
>
> >
> > This is a well known bug - CSCdp33819
> > We were hit by it quite hard but luckily cisco was quick to fix it. So, the
> > standard sdvice - upgrade the ios! :-)
> >
> > Bug Id : CSCdp33819
> > Headline on TTY lines process virtual-exec is running, no user dialed in
> > Version Found 12.0(5)T01
> > Fixed-in Version 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB
> >
> > Release Notes
> > If you enter the show users command, you might see that
> > the Virtual Exec process is running on the modem even when no users are
> > connected. This situation does not affect the allocation of the modem for
> > subsequent sessions. The next user that logs in to the modem will clear the
> > condition. There is no workaround.
> >
> > Hope this helps.
> >
> > Denis Saveliev
> > Network Engineer
> > Energis Squared
> > DDI: +44 (0) 113 207 6188
> > Fax: +44 (0) 113 234 6065
> > Mob: +44 (0) 7899 995 996
> >
> >
> > > -----Original Message-----
> > > From: Mohd Nazri Ismail [mailto:mnazri@mimos.my]
> > > Sent: 18 May 2001 01:54
> > > To: cisco-nsp@puck.nether.net
> > > Cc: tam; Alessandro Chiolo; Nikki Mehta; Cisco-Nas (E-mail); Cisco-Nsp
> > > (E-mail)
> > > Subject: [nsp] AS5300 <Hangging/Stuck>
> > >
> > >
> > >
> > >
> > > Hello Everybody, I need some help here.
> > >
> > > We are using Cisco AS5300,
> > > I normally have the post dial terminal screen up (bring up
> > > terminal after
> > > dialing) to check the login process and found that some
> > > modems just hang
> > > after presenting you with the login screen. It cannot accept
> > > input from my
> > > keyboard as it does not echo the characters that I type. Then
> > > it returns a
> > > timeout message! It looks like when there are many users online.
> > >
> > > When we run command 'show users', it will show a lot of '
> > > Virtual Exec',
> > > default only 5 'Virtual Exec' BUT in my case it will appear more that
> > > that.
> > >
> > > After i reboot/reload my AS5300, it will back to normal and
> > > our users can
> > > dial in without any problem to AS5300. This problem will
> > > happen again in
> > > the future.
> > >
> > >
> > > Anyone from this group have faced this problem. Please help me.
> > >
> > > thank you a lot.
> > >
> > > --nazri/access
> > >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT