RE: [nsp] OOB modem config

From: Hallgren, Michael (michael.hallgren@Teleglobe.com)
Date: Tue May 29 2001 - 09:31:06 EDT

Next message: KF: "[nsp] 7206 NPE 200"
Previous message: George Robbins: "Re: [nsp] [nsp] VIP if-con and IOS switching (was: Monitoring DoS"
Maybe in reply to: Tran, David: "[nsp] OOB modem config"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

what about the same problem (OOB over POTS, using USR) to
a Cat 6509?

--
Michael Hallgren, Inet Eng., Teleglobe, MH2198-RIPE
> -----Message d'origine-----
> De : Bill Carter [mailto:bcarter@family-net.net]
> Envoyé : mercredi 11 avril 2001 18:14
> À : cisco-nsp@puck.nether.net
> Cc : Thomas Kernen; cisco-nsp@puck.nether.net
> Objet : Re: [nsp] OOB modem config
> 
> 
> Don't forget:
> line aux 0
> login
> password cisco
> 
> I wanted to send along a USR modem string.  I was having some strange 
> DDR problems that were fixed with this.  The string came from TAC.
> 
> AT&FS0=1&C1&D3&H1&R2&B1&M4&K1E0&W
> 
> 
> Stephen Gill wrote:
> 
> > According to Cisco:
> >  Here is the configuraton that you need for your aux
> > port configuration.
> > 
> > line aux 0
> > modem inout
> > transport input all
> > flowcontrol hardware
> > speed 115200
> > 
> > 
> > Make sure that you're dip switches on the USR modem
> > are 3 8 down and the rest are up.
> > Due to the aux port in the 7000 serie routes, you will
> > need to purchase a regular modem cable from Radio
> > shack to make it work. Do not use the cisco wire for
> > it will not work because that adapter wired the DCD to
> > the DSR and the port on the router is expecting a DCD.
> > So with that cable you reverse telnet fine but PPP
> > will not come up due to the fact that it never sees
> > the DCD of the line.
> > 
> > 
> > I tried this on a 7206 AUX port and it worked well w/
> > a USR sportster 56k.
> > 
> > -- steve
> > 
> > --- Thomas Kernen <tkernen@deckpoint.ch> wrote:
> > 
> >> I'm trying to get a modem (USR Sportster) to act as
> >> an Out of Band Management modem on a 7206,
> >> unfortunaly I'm having little success
> >> with my config. The modem answers the line and
> >> connects but then I just can't get a login prompt.
> >> I'm sure someone on the list have
> >> a config that works they could send me.
> >> 
> >> Cheers,
> >> Thomas
> >> 
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Get email at your own domain with Yahoo! Mail. 
> > http://personal.mail.yahoo.com/
> > 
> > 
> > 
>

Next message: KF: "[nsp] 7206 NPE 200"
Previous message: George Robbins: "Re: [nsp] [nsp] VIP if-con and IOS switching (was: Monitoring DoS"
Maybe in reply to: Tran, David: "[nsp] OOB modem config"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT