On Tue, May 29, 2001 at 07:13:42AM -0400, George Robbins wrote:
> Well, the nature of "undocumented commands" is that problems don't
> neccesarily turn into caveats. The general trend is to make "useful"
> state and stats visible with normal exec-level commands, though
> obviously this isn't a big priority.
>
> I don't think there's any non-vip command to show memory and cpu, but
> there's supposed to be a new mib object with "per cpu" data somewhere
> along the line.
Warhawk#sh contr vip 6 tech | i ^CPU utilization|^Total
Total: 22444224, Used: 9460520, Free: 12983704
CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
Warhawk#
The downside of this command is that the VIP generates the whole sh
tech despite the fact that you only want to see two lines. But this
will do what you want.
eric
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT