That's what I did. NPE-225 works perfect in the non-vxr chassis.
- jared
On Mon, Jun 04, 2001 at 05:41:32PM -0400, Charles Sprickman wrote:
> While we're at it, how about low-cost replacements for the NPE-150?
>
> Charles
>
> On Mon, 4 Jun 2001, Daniel Drown wrote:
>
> > On Mon, Jun 04, 2001 at 04:16:05PM -0400, Jared Mauch wrote:
> > > Doesn't the NPE-200 take 72-pin simms?
> > >
> > > If it takes DIMMS, I would give it a try.
> >
> > The NPE-200 I just took apart here takes 72-pin FP Parity simms.
> >
> > --
> > Daniel Drown
> >
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT