>
>
> Thanks, but netflow-acceleration was already in the plans, I thought it was
> part of 12.0 mainline. (It is include in 12.0S and T)
> I was curious if some other acceleration, not demand-driven, has been
> implemented so far for L3-only(src interface, src IP) policy-routing.
>
not that i am aware of. but somebody else may know the answer. PBR
is done in HW on some IOS platforms (if you are looking for really
high performance PBR).
cheers
.siva
>
> Rubens Kuhl Jr.
>
>
>
> -----Original Message-----
> From: Siva Valliappan [mailto:svalliap@cisco.com]
> Sent: Wednesday, June 13, 2001 12:05 AM
> To: Rubens Kuhl Jr.
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] Cisco 7200VXR and Policy-Routing
>
>
> policy routing was netflow feature accelerated in 12.0()T.
> so if you run latest 12.1 mainline with cef, and netflow feature
> acceleration you will get performance benefits. runing 12.1()T
> will allow you to also enable turbo-acls with may/may not gain
> you some additional performance.
>
> cheers
> .siva
>
>
> On Wed, 13 Jun 2001, Rubens Kuhl Jr. wrote:
>
> >
> > Have been there any recent enhancements to policy-routing on 12.1 , 12.2,
> E
> > or T trains ?
> > I'm evaluating a project idea which would require intensive
> policy-routing,
> > i.e., half of the traffic (packets in one direction) will be routed thru
> > route-maps (simple route-maps, mostly set-next-hop from 802.1q
> > sub-interfaces).
> >
> > Hardware is 7206VXR with PA-FEs and PA-A3-OC3.
> >
> >
> >
> > Rubens Kuhl Jr.
> >
> >
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:41 EDT