On Mon, 18 Jun 2001, Siva Valliappan wrote:
> On Mon, 18 Jun 2001, Joe McGuckin wrote:
> > We have a Cisco 7500 with (among other cards) the following:
> > - PA-POS-OC3
> > - PA-MC-2T3
> >
> > We are currently running 12.0(6)S (rsp-k3pv-mz.120-6.S.bin)
> >
> > I would like to move to a more recent version of IOS that
> > supports ethernet dot1q encapsulation.
> >
>
> i assume you are running this with a FE or GE interface?
>
> > Does the latest 12.0S service provider (-p-) build support
> > dot1q?
>
> yes
Do you know if this is documented somewhere?
Neither 802.1q or ISL show up in the Feature Navigator for 12.0S. I ended
up grabbing 12.1 because I needed ISL or 802.1q.
http://www.cisco.com/cgi-bin/Support/FeatureNav/FN1.pl?HStartForm1=True
Looking at the 12.0S release notes, it looks like ISL was added in
12.0(5)S -> but it still isn't in the Feature Navigator.
What would be the right place to report this? (Or, am I just missing
something?)
OK, second question: Are they dCEF switched in the latest 12.0S images?
ISL is (claimed, anyway) to be dCEF switched in 12.1 but 802.1q isn't
until 12.1T.
Third question: Do I care if they are dCEF switched? This is a 7507 with a
T3 and 2 FE's, each with a 2924xl and a bunch of ISL VLAN's. Traffic is
likely to be below 30mbits for the forseable future.
-- Charlie Watts cewatts@frontier.net Frontier Internet Systems Janitor and Network Plumber http://www.frontier.net/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT