the quad-oc12 LC should support sampled netflow in the version you
are running. do you have any other features (acls, etc) configured on this
port or other ports on your LC? how are you determining that netflow
isn't working?
cheers
.siva
>
> Thanks for the reply.Below is the result of "sh ver" on our router and my configuration for the netflow.
>
> router-a>sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) GS Software (GSR-P-M), Version 12.0(15)S4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Thu 07-Jun-01 15:06 by ninahung
> Image text-base: 0x60010950, data-base: 0x61BE8000
>
> ROM: System Bootstrap, Version 11.2(17)GS2, [htseng 180] EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> BOOTFLASH: GS Software (GSR-P-M), Version 12.0(15)S4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> router-a uptime is 23 hours, 27 minutes
> System returned to ROM by reload at 05:31:06 UTC Sat Mar 18 2000
> System image file is "slot0:gsr-p-mz-120-15.S4"
>
> cisco 12016-8R/GRP (R5000) processor (revision 0x05) with 262144K bytes of memory.
> R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> Last reset from power-on
>
> 2 Route Processor Cards
> 2 Clock Scheduler Cards
> 3 Switch Fabric Cards
> 2 8-port OC3 POS controllers (16 POS).
> 1 16-port OC3 POS controller (16 POS).
> 8 OC48 POS controllers (8 POS).
> 1 Ethernet/IEEE 802.3 interface(s)
> 40 Packet over SONET network interface(s)
> 507K bytes of non-volatile configuration memory.
>
> 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> 8192K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
> My Configs for the netflow:
>
> #conf t
>
> int pos0/4
> ip route-cache flow sampled
> exit
>
> ip flow-sampling-mode packet-interval 1000
> #ip flow-export version 5 origin-as
> ip flow-export source loopback0
>
> ip flow-aggregation cache as
> export destination x.x.x.x 9995
> enabled
> exit
>
> --------------------------
> >the Engine 2 LCs support sampled netflow. but the releases that sampled
> >netflow is supported in depends on the type of LC you are using. could
> >you provide a "sh ver" and the config of the LC in question?
> >
> >thank you
> >.siva
> >
> >
> >On Tue, 19 Jun 2001, huiy wrote:
> >
> >> Does anyone know if the Cisco GSR engine2 support netflow(sampled netflow) or not? I try it on the engine2, but it doesn't work!
> >>
>
>
> _____________________________________________
> [足不出户 轻松上网] 上网专用号：95963，用户名/密码：263
> 特惠精品空调买又送 http://shopping.263.net/hotsale/aircondition/index.asp
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT