Is this Frame-Relay? Sounds like a layer 2 protocol problem (PPP, HDLC,
Frame-Relay). But apparently the other end doesn't know it's down
because it's still sending you traffic. Missing or mis-configured DLCI?
-david
On 21 Jun 2001 09:15:20 -0700, Brian wrote:
> Amother possibility, since the int is up, is that some portion is misconfigged. Disagreement about ip address, netmask, and other higher layer features of ppp can also cause this.
>
> Bri
> ----- Original Message -----
> From: Konstantinos Bilalis
> To: cisco-nsp@puck.nether.net
> Sent: Thursday, June 21, 2001 1:55 AM
> Subject: [nsp] Line protocol down!!
>
>
> Dear all.
>
>
>
> I have a problem in a router and everyone that could help I would be greatful.
>
> Although the router's interface is "Serial1/2 is up, line protocol is down",
>
> I have "30 second input rate 718000 bits/sec, 154 packets/sec & 30 second output rate 0 bits/sec, 0 packets/sec"!
>
> Is this possible to happen???
>
>
>
> Thanks in advance.
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT