Ignore last stupid comment from me - wrong problem...
-H-
>
> I have acquired a 1605r and put a wic-1t for the edge of my network.
> I've used the 3600's for about 2 years, so I'm not a dummy.
>
> When a CSU/DSU is hooked up when the router boots, the console port is
> unresponsive. When the router boot without CSU/DSU, the console port
> works, even after the CSU/DSU is connected.
>
> LEDs are OK, tried different WIC-1t, V35 cable, CSU/DSU, clearing
> startup-config, all with consistent results :-(
>
> Anyone seen this before? Search engines don't turn up much.
>
> I'm sure this would make a fine low end ethernet-ethernet router, but T1
> would be nice too.
>
> TIA,
> Jason
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT