RE: [nsp] how i check the RAMI just want to run BGP with default route from one provider
and partial route from other provider.
I m going to upgrade it to 128MB
Thanks in advance.
Tejal
----- Original Message -----
From: Stephane Perez
To: 'Tejal' ; cisco-nsp
Sent: Friday, August 03, 2001 5:21 PM
Subject: RE: [nsp] how i check the RAM
Hello,
You effectively have 32MB of memory, you also can check by using the command:
show version
It's a very low if you need to run BGP with the full internet feed.
cheers
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PEREZ Stephane
Carrier IP Specialist, Shasta GTS
Nortel Networks
ATS IP Core Infrastructure
25, allee Pierre Ziller
06560 Valbonne, FRANCE
Phone: +33 4 92 96 18 05 Mail : mailto:perezs@nortelnetworks.com
Fax : +33 4 92 96 16 68 www : http://www.nortelnetworks.com
Esn : 296-1805 Intranet : http://hector.europe.nortel.com
ICQ : 120356046
-----Original Message-----
From: Tejal [mailto:tejal@worldgatein.net]
Sent: Friday, August 03, 2001 11:49 AM
To: cisco-nsp
Subject: [nsp] how i check the RAM
Dear friends,
I have posted this message before also.
can anybody pl. tell me that how can check the DRAM
in my existing router.
Beside the commanf sh mem.
i m not able to understat its output.
its showing processor and i/o memoty.
I will get following message at boot.
does it mean that i have 32MB of RAM in my router.
I want to start BGP on the router.so pl. tell me
that is that any way to check out hoe much RAM
my existing router have?
#System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
#Copyright (c) 1999 by cisco Systems, Inc.
#TAC:Home:SW:IOS:Specials for info
#C3600 platform with 32768 Kbytes of main memory
Thanks in advance
Tejal
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:48 EDT