Re: [nsp] How to add user

• Next message: Tejal: "[nsp] How to redirect h323 traffic"
• Previous message: George Robbins: "Re: [nsp] GSR LCs in stuck in FABL RUN state"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

thanks
i have done this.
Now how to login using this uname and passwd through
telnet.

thanks in advance

Tejal
----- Original Message -----
From: sassatelli@acantho.com <tiziano.sassatelli@acantho.com>
To: 'Tejal' <tejal@worldgatein.net>
Sent: Monday, August 20, 2001 3:52 PM
Subject: RE: [nsp] How to add user

> The command is:
>
> username [username] privilege [xx] password [password]
>
> Example: username ADMIN privilege 15 password ADMIN
>
> Best Regards.
>
> -----Original Message-----
> From: Tejal [mailto:tejal@worldgatein.net]
> Sent: Monday, August 20, 2001 11:17 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] How to add user
>
>
> Hi all,
>
> how can i add user in my cisco
> with diffrent priveledges.
> what is the command for that.
>
> thanks in advance
>
> Tejal
>
>

• Next message: Tejal: "[nsp] How to redirect h323 traffic"
• Previous message: George Robbins: "Re: [nsp] GSR LCs in stuck in FABL RUN state"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:50 EDT