[nsp] REG: OSPF Load Balancing

From: Vinod Anthony Joseph Cherunni (vac@dsqworld.com)
Date: Fri Oct 05 2001 - 04:54:27 EDT


Dear All,

I have a scenario wherein I have three routers router A, B & C connected
in a fully meshed manner. Assuming the OSPF costs are as follows -

Router A to Router B = OSPF cost 100
Router A to Router C = OSPF cost 100
Router C to Router B = OSPF cost 100

If I would want to load - balance traffic from networks connected to
router A destined for networks connected to router B across both links
(Direct link from Router A to Router B & link to Router B via Router C).
Is it enough that based on the above mentioned scenario, i change the OSPF
cost as given below -

Router A to Router B = OSPF cost 100
Router A to Router C = OSPF cost 50
Router C to Router B = OSPF cost 50

Kindly advise,

With warm regards,

Vinod.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:50 EDT