Hello,
You define an authentication method to do nothing:
!
aaa authentication ppp do-nothing none
!
on the serial line you configure
ppp authentication <chap/pap> do-nothing
--Z.
-----Eredeti üzenet-----
Feladó: akber [mailto:mirzaakber@yahoo.com]
Küldve: 2001. október 8. 21:24
Címzett: cisco-nsp@puck.nether.net
Tárgy: [nsp] tacacs ppp
HI,
I am running ppp encapsulation over a Lease line. I have a Tacacs server
at my cetral office for ppp autheentication for asyn dial user.
If i run hdlc on serial link its up but if i change to ppp it gives me
serial is up, line protocol is down. When i started debug ppp
authentication is says authentication failure.
So what i need to know :- how i make serial link to by-pass ppp
authentication from tacacs.
or
i configure some authenticatiob so that links gets authnenticaticated
from tacacs.
some aaa commands to bypass this.
I have alredy tried with chap pap and not much benefit.
Thanks
Akber
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:50 EDT