Hi Dan,
You'll need to use CAR (Committed Access Rate) limiting on the interface
on the router or a device like a Packeteer.
If you just want that one IP limited then use an ACL to rate-limit an
access-list containing just that one IP address and then an 'open' access
rate for the rest of the devices on that network/subnetwork.
Darren Ward
CCIE 8245
PS I think you can do this via a Linux box as well but have never done it
myself.
On Sun, 14 Oct 2001, Dave VanAuken wrote:
> Have an NT box going on our network, wish to throttle the FastEthernet port that
> it is on to 1mb max. Have set "bandwidth 1000" in the interface config... can
> I assume that is sufficient to allow it a maximum of 1mb bi-directional
> bandwidth?
>
> thx
>
> Dave
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT