Hi all,
Does NM-1E2W card able to do Full-dplex?
Below is my set up.
c3604(NM-1E2W)10/full ---- c3512(F0/3)10/full.
When I do this, I get
"%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/3(not
half duplex), with c3604 Ethernet0/0 (half duplex).5"
and
"%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full
duplex), with c3512 FastEthernet0/3 (full duplex)."
When I change my setting to
c3604(NM-1E2W)10/full ---- c3512(F0/3)auto/auto
It gets detected as 10/half on the switch side.
any idea?
-tishi
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT