Hi,
On a cisco router, when I apply a route-map to a
bgp peer ( ebgp peer ) and on that peer I also have
applied a route-map for outgoing routes, when I give
the command
show ip bgp neig x.y.z.w advertis
it gives advertised routes before passing through the
route map.
I was wondering if there is a command to find out the
routes that are actually being advertised to my
neighbor after passing through the route map.
For eg.
I am doing an AS path prepend with a neighbor.
when I give the command show ip bgp nei x.y.z.w ad
it shows the routes advertised, but not the length of
the AS-path prepended routes, same hold true for MED
etc....
Besides logging onto the ebgp peer , is there a way to
find out the routes and attributes being advertised on
the local CISCO router ??
Rgds,
Edward
=====
Edward S. Desouza
23/24 Manali 5,
Evershine Nagar,
Malad (W),
Bombay 400064.
Tel :9122-8886362
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT