Hi,
I have a problem with one access-list using time-range. If the time-range
is in active state it worked fine. It's denied all packet, but when it is
in inactive state it performs a lot of packet loss, 80%, but only from the
network filtered by the time-range line.
ip access-list extended ROEDUCJ-BB
deny ip 10.0.0.0 0.255.255.255 any
deny ip 127.0.0.0 0.255.255.255 any
deny ip 172.16.0.0 0.15.255.255 any
deny ip 192.168.0.0 0.0.255.255 any
deny ip xxx.xxx.xxx.xxx 0.0.0.15 any time-range test
permit ip any any
mercur#sh time-range test
time-range entry: test (active)
periodic weekdays 7:00 to 20:00
used in: IP ACL entry
interface Serial3/0/0
xxxxxxxxxxxxxx
bandwith 2048
ip access-group ROEDUCJ-BB out
xxxxxxxxxxxxxxxx
end
I use IOS 12.2(1), RELEASE SOFTWARE (fc2) on Cisco 7513.
I'm looking for suggestion or answers on this problem.
Thanks,
Otto
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT