Are you running a eigrp? If so, you may have de-preffed that interface
relative to other paths. I don't recall which other routing protocols
are directly bandwidth aware.
George
> From: "pankaj" <pankaj@worldgatein.net>
> To: <cisco-nsp@puck.nether.net>
> Date: Tue, 30 Oct 2001 16:25:04 +0530
> Subject: [nsp] bandwidth 512
>
> Dear frineds
>
> I have configured my serial 0/0 with bandwidth 512
>
> It was working fine , suddenly i observed that the 5 minutes output rate 540
> bits/sec
> How its possible when bandwidth cap is 512 ..........????? Or is it router
> problem.
> What does bandwidth 512 do, will it but cap on output or input or cumulative
> of both.
>
>
> Can any body justify.
>
> Thanks
> pp
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT