Hi,
* jonas@stenling.nu (Jonas Stenling) [Tue 30 Oct 2001, 11:49 CET]:
I don't have an answer to your RP question, but have something to add to:
> Are you supposed to run pim on the interface where you are peering with
> other operators?
Generally, if you're exchanging multicast routes (`neighbor 1.2.3.4
remote-as 65535 nlri unicast multicast') you should enable PIM-SM.
Exchange points usually have a fabric used exclusively for multicast
apart from unicast ones (like LINX and AMS-IX have).
If in doubt, contact the peer. Some transit providers offer multicast
at a premium, with others you just have to ask for it to get it enabled.
-- Niels.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT