Try:
Controller E1 0/0
Channel-group 0 unframed
-----Original Message-----
From: "Vinod Anthony Joseph Cherunni" <vac@antarix.biz>
Date: Sun, 11 Nov 2001 05:49:21
To: cisco-nsp@puck.nether.net
Subject: [nsp] REG: Cisco 3662
Dear All,
On a Cisco 3662 router running Telco software (Ver 12.1.5.T10), I am
unable to configure the Channelized E1 card (NM-2CE1B) to operate in
Unframed mode. The reason for me to use the above mentioned IOS software
is because the router acts as an MPLS PE router.
On a Cisco 7206-VXR router, I am able to configure an 8 Port E1 adapter,
to work in unframed mode. Can i be advised as how to enable the same for
the 3662 router.
Thanks in advance.
With warm regards,
Vinod.
__________________________
BlackBerry Wireless Email!
www.blackberry.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:53 EDT