Re: SODIMM on NPE-400

From: Brian (bri@sonicboom.org)
Date: Tue Nov 13 2001 - 11:42:31 EST

Next message: KF: "RE: [nsp] What is VXR"
Previous message: Yu, Kent: "SODIMM on NPE-400"
In reply to: Yu, Kent: "SODIMM on NPE-400"
Next in thread: Yu, Kent: "SODIMM on NPE-400"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Kingston.com shows these part numbers..

256MB** KCS-NPE400/256 1

512MB** KCS-NPE400/512 1

Here's a url.
http://www.ec.kingston.com/ecom/kepler/ModelsInfo_Bod.asp?SysID=+10471+&distributor=0&SUBMIT1=Find

    Brian
  ----- Original Message -----
  From: Yu, Kent
  To: cisco-nsp@puck.nether.net
  Sent: Tuesday, November 13, 2001 8:06 AM
  Subject: SODIMM on NPE-400

I am trying to upgrade our 7206VXR in the lab to 512M. Cannot figure out the specificaiton of the SODIMM on NPE-400, I guess this is something like those 144pin SODIMM used on laptops. Most of those used on laptops do not have ECC, I guess this should not be an issue since we only use it for testing. Any idea?

Thanks
Kent

Next message: KF: "RE: [nsp] What is VXR"
Previous message: Yu, Kent: "SODIMM on NPE-400"
In reply to: Yu, Kent: "SODIMM on NPE-400"
Next in thread: Yu, Kent: "SODIMM on NPE-400"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:54 EDT