Re: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E

From: Gert Doering (gert@greenie.muc.de)
Date: Thu Nov 15 2001 - 06:19:18 EST

Next message: Pegg Damon: "RE: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Previous message: Mark Pace Balzan: "Re: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
In reply to: Elijah Kagan: "[nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Next in thread: Elijah Kagan: "[nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Thu, Nov 15, 2001 at 12:59:30PM +0200, Elijah Kagan wrote:
> I am starting this thread again because I had a very bad luck with the
> above hardware. As it turns out 12.0(15)S has some buffering problems that
> causes severe packet loss. 12.0(19.1)S which fixes the buffer issue
> introduces memory leak issues, and hence is also unusable.

We use 12.0(17)S and 12.0(18)S with good results.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de

Next message: Pegg Damon: "RE: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Previous message: Mark Pace Balzan: "Re: [nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
In reply to: Elijah Kagan: "[nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Next in thread: Elijah Kagan: "[nsp] Which IOS for 7206VXR, NPE-400, C7200-I/O-2FE/E"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:54 EDT