Re: [nsp] 3640 dial up

From: Dmitry Cherkasov (chd@intercom.net.ua)
Date: Fri Nov 16 2001 - 13:18:16 EST

Next message: Hassan, Shehzad: "RE: [nsp] Cisco 7500 Series Router and CEF/ISL/SMIP Issues"
Previous message: Yuval Ben-Ari: "RE: [nsp] two interfaces on the same LAN with same subnet"
In reply to: Mehta, Phoram: "[nsp] 3640 dial up"
Next in thread: Mehta, Phoram: "[nsp] 3640 dial up"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On Thu, Nov 15, 2001 at 01:09:56PM -0600, Mehta, Phoram wrote:
>
> Does anybody know how to control dial up users on 3640?

One of the solutions for you (though not the best probably) is
to use an appropriate tacacs+/radius configuration.

The other way is to block certain connects at your TELCO
provider's side.

Sincerely,
Dm1try

-- 
-------------------------------------------------------
 Dmitry Cherkasov   ISP "Intercom"   (380)44 251-12-88
   http://www.intercom.net.ua    DC1-UANIC CHD1-RIPE

Next message: Hassan, Shehzad: "RE: [nsp] Cisco 7500 Series Router and CEF/ISL/SMIP Issues"
Previous message: Yuval Ben-Ari: "RE: [nsp] two interfaces on the same LAN with same subnet"
In reply to: Mehta, Phoram: "[nsp] 3640 dial up"
Next in thread: Mehta, Phoram: "[nsp] 3640 dial up"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:54 EDT