----- Original Message -----
From: "Ryan Roylance" <ryan@accelica.com>
To: "pankaj" <pankaj@worldgatein.net>
Sent: Wednesday, November 21, 2001 2:00 PM
Subject: RE: strange behavior of serial port's throughput
> What kind of interface is it? It appears that your graph is topping out
at
> 92kb per second over a five minute interval. Do you have MRTG configured
> with a maximum limit? If you do a show interface command on the router
what
> is the txload and rxload? If you send some of this information to the
list
> it would help people out.
Its serial interface connecting to my provider, its topping around 86 KB/s
due to my provider restricted me to that limit, my actaull configration is
of 256 KB/s on router interface and MRTG both.
reliablility 255/255, txload 28/255, rxload 86/255-----pp
>
> thanks
> ryan
>
>
> -----Original Message-----
> From: pankaj [mailto:pankaj@worldgatein.net]
> Sent: Tuesday, November 20, 2001 9:48 PM
> To: cisco-nsp@puck.nether.net
> Subject: strange behavior of serial port's throughput
>
>
> Dear friends
>
> During night there are no body using the internet in my network but i dont
> know sometime why my router is constantly showing use of full bandwidth
> during night also. I have checked , and nobody was using bandwidth during
> yesterday night still why my router showing full use of bandwidth????
> Any idea???
> Attached graph of mrtg....
> Thanks
> pp
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:55 EDT