If you see lots of late collisions, the other side must be running in full
duplex while your side is in half. If you see lots of CRC errors and/or
runts, the other side is in half-duplex while you in full.
On Sun, Dec 09, 2001 at 02:26:21PM +0000, isamar@isamarmaia.org wrote:
>
> My setup for this interface was
> duplex auto
> speed auto
>
> Then, after reading your mail, I changed to:
> half-duplex
> speed auto
>
> And the error persists...
>
>
> On Fri, 7 Dec 2001, Jared Mauch wrote:
>
> > this looks to me like you have the duplex settings for
> > the interface wrong.
> >
> > On Sun, Dec 09, 2001 at 12:15:04PM +0000, isamar@isamarmaia.org wrote:
> > >
> > > I just installed a Cisco 2600 router with 2 Fastethernet.
> > > I am using one for WAN and the other for LAN.
> > > I configured almost everything but an error is being recorded in my
> > > logs...
> > > Detail: My link is 2048K for downstream and 512K for upstream. My ISP
> > > makes
> > > this limitation in the other side. Also, every ftp upload using a Windows
> > > machine from my LAN, fails. I was using a PC box with Linux working as
> > > router before, and It was perfect.
> > >
> > > Anybody can help me please?
> > >
> > > Dec 8 11:57:51 hanuman 1125: *Mar 2 00:44:28: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 11:57:59 hanuman 1126: *Mar 2 00:44:36: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:00:26 hanuman 1127: *Mar 2 00:47:04: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:02:30 hanuman 1128: *Mar 2 00:49:07: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:03:06 hanuman 1129: *Mar 2 00:49:43: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:04:56 hanuman 1130: *Mar 2 00:51:33: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:04:57 hanuman 1131: *Mar 2 00:51:35: %LINK-3-UPDOWN: Interface
> > > FastEthernet0/1, changed state to up
> > > Dec 8 12:04:58 hanuman 1132: *Mar 2 00:51:35: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > > Dec 8 12:05:00 hanuman 1133: *Mar 2 00:51:37: %LINK-3-UPDOWN: Interface
> > > FastEthernet0/1, changed state to up
> > > Dec 8 12:05:12 hanuman 1134: *Mar 2 00:51:49: %AMDP2_FE-5-LATECOLL:
> > > FastEthernet0/1 transmit error
> > >
> > >
> >
> > --
> > Jared Mauch | pgp key available via finger from jared@puck.nether.net
> > clue++; | http://puck.nether.net/~jared/ My statements are only mine.
> >
---end quoted text---
-- CCNP, CCDP (R&S) Dmitri E. Kalintsev CDPlayer@irc Network Architect @ connect.com.au dek @ connect.com.au phone: +61 3 9674 3913 fax: 9251 3666 http://-UNAVAIL- UIN:7150410 cell: +61 414 821 382
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT