The IOS Image you said you are using (mc3810-a2is-mz.12.0-4.T (32/8))
supports :
WCCP 1 & WCCP 2
*************Complete List of Features for this image*****************
Additional Vendor-Proprietary RADIUS Attributes
Airline Product Set (ALPS)
Always On Dynamic ISDN (AO/DI)
Automatic modem configuration
Bandwidth Allocation Control Protocol (BACP)
BGP
BGP 4
BGP 4 Multipath Support
BGP 4 Prefix Filter and In-bound Route Maps
BGP 4 Soft Config
Bisync (BSC)
BSTUN (Block Serial Tunneling)
Call Detail Records (CDR)
CGMP, Cisco Group Management Protocol
Challege Handshake Authentication Protocol (CHAP)
Cisco Discovery Protocol (CDP)
CLI Search String
Commented IP Access List Entries
Common Channel Signaling (CCS)
Compression Control Protocol
CT1/RBS (Robbed Bit Signaling)
Custom Queueing (CQ)
Default Passive Interface
DHCP Proxy Client
Dial backup
Dial-on-demand
Dialer profiles
Dialer Watch
DLSw (RFC 1795)
DLSw CO features
DLSw V2
DLSw+
DLSw+ Asynchronous TCP Enhancements
DLSw+ Backup Peer Extensions for Encapsulation Types
DLSw+ Border Peer Caching
DLSw+ Enhanced Load Balancing
DLSw+ Peer Group Clusters
DLSw+ RSVP Bandwidth Reservation
DLSw+ SNA Type of Service
DLSw+ Support For Transporting LLC1 UI Traffic
DNS Server Request Support in AAA
Double Authentication
Down Stream Physical Unit (DSPU) over DLSw+
Downstream PU concentration (DSPU)
DRP Server Agent
Easy IP (Phase 1)
EGP
Enhanced ATM VC Configuration and Management
Enhanced IGRP (EIGRP)
Enhanced Local Management Interface (ELMI)
Fast-Switched Policy Routing
Fast-Switched SRTLB
Frame Relay
Frame Relay Access Support (FRAS) Border Access Node (BAN)
Frame Relay Access Support (FRAS) Boundary Network Node (BNN)
Frame Relay Access Support (FRAS) Dial Backup over DLSW+
Frame Relay Access Support (FRAS) DLCI Backup
Frame Relay Access Support (FRAS) Host
Frame Relay Fragmentation (FRF.12)
Frame Relay FRF.9 Payload Compression
Frame Relay Traffic Shaping (FRTS)
FRAS Enhancements
Generic Routing Encapsulation (GRE)
Generic Traffic Shaping (GTS)
Half bridge/half router for CPP and PPP
Hot Standby Router Protocol (HSRP)
HTTP Security
IGMP Version 1
IGMP Version 2
IGRP
Integrated routing and bridging (IRB)
Internet Protocol Control Protocol (IPCP) address negotiation
IP
IP Enhanced IGRP Route Authentication
IP Multicast Load Splitting across Equal-Cost Paths
IP Named Access Control List
IP Precedence for GRE Tunnels
ISDN
ISDN Advice of Charge (AOC)
ISDN Caller ID Callback
ISDN Leased Line at 128kbps
ISDN-NFAS with D Channel Back Up
LAN Network Manager over DLSw+
Large Scale Dialout
Layer 2 Forwarding-Fast Switching
Line Printer Daemon (LPD)
Local Voice Busyout (LVBO)
Lock and Key
Message Banners for AAA Authentication
Microsoft Point-to-Point Compression (MPPC)
MS Callback
MS-CHAP Support
Multichassis MultiLink PPP (MMP)
Multihop VPDN
Multilink PPP
Named Method Lists for AAA Authorization and Accounting
NAT-Network Address Translation
National ISDN Switch Types
Native Client Interface Architecture (NCIA) Server
Native Service Point over DLSW+
Network Time Protocol (NTP)
Next Hop Resolution Protocol (NHRP)
On Demand Routing (ODR)
OSPF
OSPF Not-So-Stubby Areas (NSSA)
OSPF On Demand Circuit (RFC 1793)
PAD Subaddressing
Parse Bookmarks
Password Authentication Protocol (PAP)
Per-User Configuration
PIM Version 1
PIM Version 2
Policy-Based Routing (PBR)
PPP
PPP over ATM
Priority Queueing (PQ)
QSIG Digit Forwarding
Qualified Logical Link Control (QLLC)
RADIUS
Random Early Detection (RED)
Reflexive Access Lists
Resource Reservation Protocol (RSVP)
Response Time Reporter (RTR)
Response Time Reporter (RTR) enhancements
RIF Passthru in DLSw+
RIP
RMON events and alarms
RTP Header Compression
SDLC-to-LAN conversion (SDLLC)
Selective Packet Discard (SPD)
Snapshot routing
SNMP
SNMP Version 3
SNMPv2C
Source-route bridging (SRB)
Spanning Tree Protocol (STP) Extension
SRB over Frame Relay
Stack Group Bidding Protocol (SGBP)
Standard IP Access List Logging
Stub IP Multicast Routing
STUN (Serial Tunnel)
Switched Multimegabit Data Service (SMDS)
Tacacs SENDAUTH function
Tacacs Single Connection
TACACS+
Time-Based Access Lists
Time-Based Access Lists Using Time Ranges
Transparent Bridging
Trunk Conditioning
Tunneling of Asynchronous Security Protocols
Vendor-Specific RADIUS Attributes
Virtual Interface Template Service
Virtual Private Dial-up Network (VPDN)
Virtual Profiles
Voice over Frame Relay (FRF.11)
Voice Over IP
WCCP Version 1
WCCP Version 2
Weighted Fair Queueing (WFQ)
Weighted RED (WRED)
x Digital Subscriber Line (xDSL) Bridge Support
X.25
X.25 on ISDN D-Channel
X.25 over Frame Relay (Annex G)
X.25 over TCP (XOT)
X.25 Switching between PVCs and SVCs
**********************************************************************
Shehzad
-----Original Message-----
From: Bill Brunton [mailto:bbrunton@intcon.net]
Sent: Monday, December 03, 2001 1:06 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] WCCP and MC3810?
I wish to use wccp on an mc3810. I have IOS 12.0(4)T and the documentation
I have seen is inconsistant. Some places it says I should have it, in
others, it does not say. Of course, it is not on the router. The image
file I am using is mc3810-a2is-mz_120-4_T.bin.
Is anyone using wccp on an mc3810? Which IOS are you using? I need ATM
with the MFT module too.
If it is possible to get, I want to make sure I can get it before I
upgrade.
Thanks,
-- Bill bbrunton@intcon.net http://www.brunton.net http://www.intcon.net KA0SEP NNN0HQA/OK ATP CFII BE200 BE300 BE300F BE1900 BE2000 BE2000S CE500The Internet... The place to be!
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT