Hello,
I have a 2 GSR 12008s with OC-48 and 8 port FE modules. Both of them
are configured almost identically, but one fails to export flow data
from the OC-48 card. When I connect to the slot and look at the flow
information, this is what I see:
LC-Slot0#sh ip flow export
Flow export is enabled
Exporting flows to 159.153.192.59 (9997)
Exporting using source IP address 159.153.192.250
Version 5 flow records, origin-as
0 flows exported in 0 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were punted to the RP
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
0 export packets were dropped due to output drops
LC-Slot0#sh ip cache flow
IP packet size distribution (0 total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448
480
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
.000
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 17826816 bytes
0 active, 262144 inactive, 0 added
0 ager polls, 0 flow alloc failures
Active flows timeout in 1 minutes
Inactive flows timeout in 15 seconds
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec)
Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow
/Flow
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP
Pkts
LC-Slot0#
When I do the same on the one that is working, it looks like this:
LC-Slot0#sh ip cache flow
IP packet size distribution (131391975 total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448
480
.001 .489 .184 .065 .026 .015 .011 .011 .005 .004 .004 .005 .002 .001
.001
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.001 .001 .014 .017 .132 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 17826816 bytes
5361 active, 256783 inactive, 69172561 added
507674141 ager polls, 0 flow alloc failures
Active flows timeout in 1 minutes
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec)
Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow
/Flow
TCP-Telnet 5007 0.0 16 69 0.0 18.2
14.6
TCP-FTP 20769 0.0 1 100 0.0 0.2
13.7
TCP-FTPD 40921 0.0 17 1293 0.1 22.7
13.0
TCP-WWW 14505922 3.3 1 828 5.6 0.8
15.3
TCP-SMTP 108611 0.0 1 575 0.0 0.1
13.5
TCP-X 28 0.0 1 48 0.0 2.3
16.0
TCP-BGP 9543 0.0 1 368 0.0 1.8
16.3
TCP-Frag 9 0.0 1 44 0.0 1.9
16.8
TCP-other 54145959 12.6 1 131 23.3 5.0
16.4
UDP-DNS 19108 0.0 1 69 0.0 1.5
16.4
UDP-NTP 80 0.0 1 76 0.0 0.0
16.4
UDP-Frag 4295 0.0 20 53 0.0 16.8
13.0
UDP-other 125240 0.0 27 215 0.8 28.1
10.8
ICMP 171424 0.0 2 45 0.0 2.7
16.1
IP-other 10283 0.0 159 1124 0.3 51.0
3.0
Total: 69167199 16.1 1 281 30.5 4.2
16.1
They were running the same version of code, but I recently upgraded the
broken one to 12.0.19S1 to no effect. 'ip route cache flow' is set on
the interface.. Perhaps OC-48 line speed is too high for Netflow without
sampling?
Thanks in advance,
Tim Bulger
Senior Network Engineer
Electronic Arts
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT