[nsp] Connecting a PA-4E from a 7206VXR to a Extreme Summit-24..

From: Joe Lin (jlin@doradosoftware.com)
Date: Fri Dec 21 2001 - 12:38:25 EST

Next message: Zhang, Anchi: "RE: Switching Advice"
Previous message: Brian DeFeyter: "Switching Advice"
Next in thread: Joe Lin: "[nsp] Connecting a PA-4E from a 7206VXR to a Extreme Summit-24.."
Maybe reply: Joe Lin: "[nsp] Connecting a PA-4E from a 7206VXR to a Extreme Summit-24.."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Wondering if anyone else out there have experienced this.

I tried to connect a port from a PA-4E on a Cisco7206VXR (4
Ethernet/IEEE 802.3 interface(s)) to a Extreme Switch..

For the life of me I could not get the 2 to talk even tho link lights
are up etc etc..

But If I plug it to a Cisco 2924, or a Juniper M5, everything works..

Any thoughts?

-joe

Next message: Zhang, Anchi: "RE: Switching Advice"
Previous message: Brian DeFeyter: "Switching Advice"
Next in thread: Joe Lin: "[nsp] Connecting a PA-4E from a 7206VXR to a Extreme Summit-24.."
Maybe reply: Joe Lin: "[nsp] Connecting a PA-4E from a 7206VXR to a Extreme Summit-24.."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:58 EDT