Hi all,
I am facing verty strange problem with my serial link.
My serial link of 512K terminate on 7206 VXR . Ip address
of WAN port is 10.10.10.10 /32.(Not actual).
IP 10.10.10.11 on my wan port and 10.10.10.12 on
my Upstream's router wan pot.
The IP range for my network is 172.16.16.0/20 (Not
actual).
Ip address 172.16.16.1 on the ethernet port of my router.
and 172.16.16.2 on my PC connected to lan.
If i ping my wan ISP wan port i.e. 10.10.10.12 from my
route iw will give 100% responce,but if i give it from my
PC it will give always 50% responce.
Result is as mention below:-
C:\>ping 172.16.16.12
Pinging 172.16.16.12 with 32 bytes of data:
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Request timed out.
Reply from 172.16.16.12: bytes=32 time<10ms TTL=254
Ping statistics for 203.187.192.39:
Packets: Sent = 12, Received = 6, Lost = 6 (50% loss)
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Anybody have faced this problem.
thanks in advance
Tejal Shah
Go To http://www.iqara.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:58 EDT