Re: [nsp] etherchannel on Cat65

From: dan hopkins (hop@nexthop.net)
Date: Mon Jan 07 2002 - 11:38:05 EST

the output of
        'show port capabilities <mod>/<port>'
will show you what ports can be Channeled together.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_2/cmd_ref/sh_p_sn.ht1146662

on 2002-01-07 22:49 +0800, Chris <chris@chrisland.net> wrote:

> Hi all,
>
> I would like to ask if EtherChannel is supported on ports across 2
> modules, e.g. 1/1 and 3/1. They are both GE connected between 2 Cat65.
> I can see one of the port leaving and joining the bridge port from time
> to time.
>
> 2002 Jan 07 22:47:58 HKT +11:36 %PAGP-5-PORTFROMSTP:Port 3/1 left bridge
> port 1/1,3/1
> 2002 Jan 07 22:48:16 HKT +11:36 %PAGP-5-PORTTOSTP:Port 3/1 joined bridge
> port 1/1,3/1
>
> They are running CatOS 6.2(2).
>
> Thanks.
>
> Regards,
> Chris
> 

-- 
hop@nexthop.net
http://www.nexthop.net/~hop

  x x  . o (( s/[^_0-9a-zA-Z]/42/g ))
 \___/
   ~

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:59 EDT