What is in access-list 120? It looks like you have that applied to filter
outbound traffic on f0/0 so that could be where your problem lies.
Good luck,
Chad
-------------------------------
Chad Skidmore
Director, IP & Data Operations
Avista Communications
http://www.avistacom.net
-----Original Message-----
From: Raymond Leung [mailto:rlcw@zonasa.com]
Sent: Tuesday, January 15, 2002 1:45 AM
To: cisco-nsp@puck.nether.net
Cc: anthony_tsang@hgctr.com
Subject: [nsp] RESEND : Change IP address on interface 's encount some
problem on 7206
Dear All :
I have some problem encount when changing IP address from one interface to
other's interface
The original configuration is like this one the following interface :
interface FastEthernet0/0 (going out to internet with using address
203.129.64.60 , local lan as 202.140.168.7)
ip address 202.140.168.7 255.255.255.0 secondary
ip address 203.129.64.60 255.255.255.240
ip access-group 120 out
no ip redirects
duplex full
no cdp enable
interface FastEthernet2/0
no ip address
shutdown
duplex full
no cdp enable
There is no problem regarding to my internet connection with this config ,
but one problem occur when the config change like this.
interface FastEthernet0/0
ip address 203.129.64.60 255.255.255.240
ip access-group 120 out
no ip redirects
duplex full
no cdp enable
interface FastEthernet2/0
ip address 202.140.168.7 255.255.255.0
duplex full
no cdp enable
The router can ping both 203.129.64.60's network (which mean can go out to
internet) , and also can ping the local network with 202.140.168.7
but one things will occur:
when i use a unix server traceroute to internet :
1 tip.zonasa.net xxxms xxxms xxxms
2. * * *
3 * * *
--With Regards,
Raymond Leung Network Analyst Zonasa Network Limited
Suite 903,Technology Plaza 651 King's Road Quarry Bay Hong Kong
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:59 EDT