At 04:22 PM 18-01-02 +0000, Mike Holdsworth wrote:
In addition to ATM issues, I suggest you read over:
http://www.potaroo.net/ispcolumn/2000-03-simplex.html
-Hank
>Hi Everyone,
>
>Is there a command that can be used to make the PA-A3-OC3MM Interface work
>in a Simplex Mode?
>
>What I want to do is only use Transmit with a cellrate of 90Mbps, and plug
>this into an ATM Switching Device (Metrodata LA1000). This then plugs into
>an ASI Satellite Modem, and at the far end is a Demodulator and similar
>LA1000 unit and Cisco 7500.
>
>The LA1000 unit can be configured to work in Simplex Mode and mask alarms
>from its unused RX ASI Port. Can the Cisco OC-3 Interface be configured to
>shut down or administratively down the RX Port on its OC-3 MM, without
>having any errors?
>
>The IOS on the Cisco is version 12.0.19
>
>Any ideas would be appreciated.
>
>Mike Holdsworth - Pre-Sales Engineeer - Metrodata Satellite & Wireless
>Division
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:00 EDT