Re: [nsp] How to solve the following error?

From: Josh Duffek (jduffek@cisco.com)
Date: Fri Jan 25 2002 - 16:13:46 EST

Next message: Raymond Leung: "[nsp] how to solve this problem , please help !!!"
Previous message: Rick Burts: "Re: [nsp] 10Mb eth question"
In reply to: Fai: "[nsp] How to solve the following error?"
Next in thread: Fai: "[nsp] How to solve the following error?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

config t
no service config
end

Josh

----- Original Message -----
From: "Fai" <fai@hknetmail.com>
To: <cisco-nsp@puck.nether.net>
Sent: Friday, January 25, 2002 6:16 AM
Subject: [nsp] How to solve the following error?

> How to solve the following error? the bootflash only have
> c5300-boot-mz.120-2.XD1. Thanks.
>
> boot of "cisco2-AS5300" using boot helper
> "bootflash:c5300-boot-mz.120-2.XD1" failed
> error returned: File read failed --
> loadprog: error - on file open
> boot: cannot load "cisco2-AS5300"

Next message: Raymond Leung: "[nsp] how to solve this problem , please help !!!"
Previous message: Rick Burts: "Re: [nsp] 10Mb eth question"
In reply to: Fai: "[nsp] How to solve the following error?"
Next in thread: Fai: "[nsp] How to solve the following error?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:01 EDT