if you are using or want to use both 7206 as "router on the stick" then for each VLAN, you want to configure redundancy have to set
up an virtual IP address and priority
for instance:
interface Vlan99 (on Cat RSM or Interface fastethernet 0/0.99 for instance on 7206)
ip address 192.168.254.253 255.255.255.0
standby ip 192.168.254.254
standby priority 200
the same on the other router but with the same standby ip address and different ip address
... Perhaps you are running also MLS on both routers... Anyway might help..
greetz
alex
> -----Original Message-----
> From: Angelo De Guzman [mailto:a.deguzman@wesolv.com.ph]
> Sent: Tuesday, February 05, 2002 9:51 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] HSRP question
>
>
> Hi,
> I have two 5505 (5505A and 5505B). Connection between the two is
> fastetherchannel. I have a Cisco 7206(old) router connected
> to 5505A and I
> wanted to add a new 7206(new) to 5505B. I wanted to implement
> HSRP, the
> connection of the 7206(old) to 5505A is through VLAN 21.
> What Should I do to implement HSRP?
> TIA,
> Angelo De Guzman
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:03 EDT