You'll have to trunk Vlan 21 to both switches, map the ports connected to
the 7206 to vlan 21 and configure hsrp as per the previous hint.
All you need is for the two router interfaces to be on the same layer-2
segment.
Later
Jon
-----Original Message-----
From: Angelo De Guzman [mailto:a.deguzman@wesolv.com.ph]
Sent: 05 February 2002 08:51
To: cisco-nsp@puck.nether.net
Subject: [nsp] HSRP question
Hi,
I have two 5505 (5505A and 5505B). Connection between the two is
fastetherchannel. I have a Cisco 7206(old) router connected to 5505A and I
wanted to add a new 7206(new) to 5505B. I wanted to implement HSRP, the
connection of the 7206(old) to 5505A is through VLAN 21.
What Should I do to implement HSRP?
TIA,
Angelo De Guzman
***********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
***********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:03 EDT