Try injecting the routes into both VRF's. If you do a traceroute vrf you
should see that the routing tables are causing the packets to take that
path.
Regards
Duane de Witt
Network Engineer
Siemens Business Services
Tel. +27 11 380 4740
Fax. +27 11 380 4710
-----Original Message-----
From: Tay Chee Yong [mailto:tcy@pacific.net.sg]
Sent: Monday, February 11, 2002 12:03 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Configuring VPN Routing/Forwarding
Hi there,
Have anyone out there configured the above with any of your customers or
clients??
I have this scenario over here, and need some advise.
vrf1 | | vrf2
S1/0 | | S1/1
---------------------------
| Cisco 7206 |
---------------------------
F1/0 | | F2/0
vrf1 | | vrf 2
I had configured 2 vrf on the router, as shown above. It seems that
whenever I want to reach F2/0 from F1/0, it will always go out by S1/0,
and
returned by S1/1 before reaching F2/0. This is bad, as it would consume
the
WAN Link's bandwidth. I would like to have the inter-vrf traffic to be
within the router. Any advise from you guys out there??
Really appreciate it.
Regards,
Cheeyong
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:04 EDT