Re: [nsp] vrf on a native-mode Cat6k

From: Steve Birnbaum (sbirn@security.org.il)
Date: Mon Feb 18 2002 - 08:12:49 EST

Next message: Gert Doering: "Re: [nsp] Basic Routing Question"
Previous message: Rolands Truls: "RE: [nsp] vrf on a native-mode Cat6k"
In reply to: Rubens Kuhl Jr.: "RE: [nsp] vrf on a native-mode Cat6k"
Next in thread: Steve Birnbaum: "Re: [nsp] vrf on a native-mode Cat6k"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

> OSM Ethernet modules.
> http://www.cisco.com/univercd/cc/td/doc/pcat/4pgietop.htm

Thanks for the information.

If the customer does decide to go ahead and add the OSM modules (as
opposed to just replacing the 6500s with 7200s) I'll email the results
to the list.

regards,

Steve

Next message: Gert Doering: "Re: [nsp] Basic Routing Question"
Previous message: Rolands Truls: "RE: [nsp] vrf on a native-mode Cat6k"
In reply to: Rubens Kuhl Jr.: "RE: [nsp] vrf on a native-mode Cat6k"
Next in thread: Steve Birnbaum: "Re: [nsp] vrf on a native-mode Cat6k"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:05 EDT