Thx all for your help
Peter
Jared Mauch schrieb:
>
> You can turn on netflow and look in "sh ip ca flow"
> for GRE/ipip packets.
>
> If there is a lot of data in the tunnel you can find it very
> fast :)
>
> - Jared
>
> On Sat, Feb 23, 2002 at 07:35:53PM +0100, Peter Burggasser wrote:
> > Hello
> >
> > How can i find a tunnel over my router. At the docus are no hints, but
> > correct me if i'm wrong. To set a tunnel is very easy on both side, but
> > what's about the routers between ? How could i prevent them. The tunnel
> > has no ip address so there is no entry at the routering table where i
> > can see, that these are tunneld. Thanks for your efforts
> >
> > Peter Burggasser
>
> --
> Jared Mauch | pgp key available via finger from jared@puck.nether.net
> clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:06 EDT