Has anyone been reproduce this bug?
CSCdt43101
On 2501 running 12.0(4)T
The active router and standby router information is different via snmp
than on the cli. The example belaow has incorrect active router
information and I see 0.0.0.0 for both active and standy routers on the
other router (10.10.0.194)
(router-01 is 10.10.0.192)
Router-01#sh standby
Ethernet0 - Group 180
Local state is Active, priority 200, may preempt
Preempt delayed 10 secs after system start
Hellotime 3 holdtime 10
Next hello sent in 00:00:00.658
Hot standby IP address is 10.10.0.200 configured
Active router is local
Standby router is 10.10.0.194 expires in 00:00:09
Standby virtual mac address is 0000.0c07.acb4
Ethernet1 - Group 190
Local state is Init, priority 200
Hellotime 3 holdtime 10
Hot standby IP address is 10.10.0.201 configured
Active router is unknown expired
Standby router is unknown expired
Standby virtual mac address is 0000.0c07.acbe
bash$snmpwalk router-01 community enterprises.9.9.106.1.2.1.1.13
CISCO-HSRP-MIB::cHsrpGrpActiveRouter.1.180 = IpAddress: 10.10.0.194
CISCO-HSRP-MIB::cHsrpGrpActiveRouter.2.190 = IpAddress: 0.0.0.0
bash$snmpwalk router-01 community enterprises.9.9.106.1.2.1.1.14
CISCO-HSRP-MIB::cHsrpGrpStandbyRouter.1.180 = IpAddress: 10.10.0.194
CISCO-HSRP-MIB::cHsrpGrpStandbyRouter.2.190 = IpAddress: 0.0.0.0
-sg
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:07 EDT