-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600
/hw_inst/nm_inst/nm-doc/connteth.htm
4.2
NM-4E
4.4
NM-2E2W Should work fine? Why not?
Does this guides you in the right direction?
- ----SIGNATURE------
Douglas M. Todd, Jr.
CCNP
Network Engineering
Partners Health Care
Building 149
149 13 Street
Charlestown, MA 02129-200
Tel: 617.726.1403
Email: dtodd@partners.org
- --------------------------------------------------------------------
PGP Finger Print: 9429 CAE3 B2D1 C2E1 DFBC E7A6 E90A 9BE5 C7B6 47BC
Key
available:http://keyserver.pgp.com:80/pks/lookup?op=get&exact=off&sear
ch=dtodd%40partners.org
Verisign S/N: 3ff65cdf58b9dceda004baeed49e16cf
https://digitalid.verisign.com/services/client/index.html
>-----Original Message-----
>From: Spencer Garrett [mailto:srg@2alpha.net]
>Sent: Thursday, March 14, 2002 8:47 PM
>To: cisco-nsp@puck.nether.net
>Subject: Re: [nsp] Compatible Dual Ethernet Module for 2651? does
>one exist?
>
>
>
>
>On Thu, 14 Mar 2002, Iva Cabric wrote:
>
>> On Tue, Mar 12, 2002 at 04:34:04PM -0500, Jason Mealins wrote:
>> > I have a 2651 with dual FE, I have been scouring around the
>> > cisco site looking for a network module with more than
>> > one Ethernet Port, it doesn't have to be Fast Ethernet,
>> > it can be just 10mbps. Does such a thing exist? Any help
>> > would be greatly appreciated. I know some modules from the
>> > 3600 series works but I really need 4 ethernet ports.
>>
>> If for some reason .q1 can't be used (it requires VLAN
>capable switch),
>> you can try with NM-2W and two WIC-1ENET (actualy 2600 can have up
>> to 6 Ethernet ports; 2x Fe fixed, 2x WIC-1ENET in WIC slots, and
>> 2x WIC-1ENET in NM-2W).
>
>These aren't supported in the 2600 series. Your best bet would be
>either an NM-4E or an NM-2FE2W (I know the NM-2E2W isn't supported
>in the 2600 series, either).
>
>Spencer
-----BEGIN PGP SIGNATURE-----
Version: PGP 7.0
iQA/AwUBPJIQnwgiZycqTvq3EQLSwwCgvRadt4BtNp+TGlIHLNXYveaZO/gAn3bD
/ES5/2BELcYI6A6QPE/NOx1X
=P+Mj
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:08 EDT