Hi all,
Does the new ios 12.2 which support docsis 1.1 support
PPPoE?
I am using the ubr7246VXR.
Following is what my sh version show on CMTS:-
==================================================
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (UBR7200-IK8S-M), Version 12.2(4)
BC1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 11-Jan-02 18:41 by cmong
Image text-base: 0x600089C0, data-base: 0x61848000
ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-
121E_npeb 117], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (UBR7200-BOOT-M), Version 12.0(15)
SC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc
sur-cmt02 uptime is 13 minutes
System returned to ROM by reload at 12:16:03 IST Fri Mar 22
2002
System restarted at 12:17:11 IST Fri Mar 22 2002
System image file is "sup-slot0:/ubr7200-ik8s-mz.122-
4.BC1.bin"
cisco uBR7246VXR (NPE400) processor (revision A) with
114688K/16384K bytes of memory.
Processor board ID SAB0534003V
R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2,
4096KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Cable Modem network interface(s)
125K bytes of non-volatile configuration memory.
46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512
bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
=======================================================
I am not able to run PPPoE on this.
regards
Tejal
Go To http://www.iqara.net
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:09 EDT