Harold,
Wait, sorry I didnt show you the other interfaces. One other
interface of R1 is connected to backbone.
So, you are telling me, interface1(R1) is not be assigned
any area (network ip_addr mask area 100) or something like that ?
And is it true even for interface2(R2) ?
-Dhiman
Harold Ritter claims the following:
> Dhiman,
>
>
> At 03:34 PM 3/27/2002 -0500, Dhiman Barman wrote:
> >Hi,
> > If I am configuring a virtual link between R1 and R2,
> >
> > interface1 interface2
> > R1---------------------------------R2
> >
> >
> > do the interfaces, interface1 and interface2 should be in the
> > same in the area ? Or is it that they should be in different areas ?
> > If they are in the same area, then why do I need to use virtual
> > link to connect R2 to the backbone thru R1 ?
> >
> >-dhiman
>
> Harold Ritter, CCIE 4168
> Advanced Network Services - ISP East
> Cisco Systems
> 300 Apollo Drive
> Chelmsford, MA 01824 USA
> Phone: 978 497 3129
> Fax: 978 497 3129
> Cisco Systems- "Empowering the Internet Generation."
>
-- The Arkansas legislature passed a law that states that the Arkansas River can rise no higher than to the Main Street bridge in Little Rock.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:09 EDT