You might want to take a look at the processes to find out what process is
hitting
you hard.
sh proc
do a show of the buffers to see if you are taking hits on the ingress/egress
traffic.
sh buff
you might want to take a look at the interfaces and see if there is an
unusual amount of
traffic coming in/out of an interface.
Looking at the processs is a good place to start since it will help see what
is running hot..
Routing protocols, arp input or input in general are good places to start.
==DMT>
> -----Original Message-----
> From: Alban Dani [SMTP:adani@stevens-tech.edu]
> Sent: Friday, March 29, 2002 10:38 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] cpu load
>
>
> Our rsm module on the Catalyst 5500 has been been experiencing
> loads of up to 100% every two to three days the last couple of weeks.
> We have been trying to get some sense of what is causing it without any
> success.
>
> Does any body has any pointers of what we should be looking for ?
>
> Thanks
>
> Alban
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:10 EDT