Hi,
feature navigator is lying to me, I'm sure...
It claims that "PPTP plus MPPE" is supported in "IP Plus" images (or for
some platforms in "IP only").
Just tried on a few different boxes, and while all of those images *did*
accept things like "vpdn-group 1 / protocol pptp", none of them will
accept "ppp encrypt mppe ...", except for the 3DES image I had on one
of the IPSEC boxes.
So I would appreciate very much if someone would clarify this for me - is
the following assumption correct (in 12.2):
- IP only/IP plus (depending on platform) -> PPTP, but no encryption
- IP plus / DES ("8" images) -> PPTP with 40 bit encr.
- IP plus / 3DES ("9" images) -> PPTP with 40 or 128 bit encr.
The PPTP faq backs this ("You need crypto images for MPPE support"), so
maybe it's just the feature navigator that's kaput...
thanks,
gert
-- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany gert@greenie.muc.de fax: +49-89-35655025 gert.doering@physik.tu-muenchen.de
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:10 EDT